how to make a cardboard coffin

There are no better props for Halloween parties than coffins.
The rotten body is hard to convince, the spider web is hokey, the flashing flash and the special-
So far, the effect tape will only benefit you. A well-
A coffin made of cardboard died in class and style.
Add fog machine and correct lighting and you have B-
Movie atmosphere for Halloween party.
Draw the shape of the coffin on cardboard with a marker pen or pen.
While the real coffin has a different design, the classic, simple 6-
The most iconic is the double-sided design.
Especially haunted houses and Halloween parties.
Cut the coffin with scissors or craft knives.
Don\'t worry about leaving lines on cardboard
You have to paint it anyway.
Stick the piece of cardboard to the other piece with adhesive tape.
Cut along the border at the top of the coffin to make the same coffin bottom.
Measure the circumference of the coffin with a rope.
Along the edge of the coffin, tie the rope to every corner as you walk around.
Then, add a few inches for better measurement.
Cut a rectangle like a rope.
It should be as wide as the coffin you want.
The length of the coffin should be a good measure.
If your coffin is 4 feet long then your rectangle should be 1 feet wide.
Attach a rectangle between the top and bottom of the coffin.
Fix it between them with tape and bend around the corner until it turns all the time.
Cut off the extra cardboard at the end.
Stick the pieces together
The glue is dry and the tape is removed.
Paint the coffin Black
Write down the names of coffin residents with yellow paint or other light colors, such as \"Dracula\", \"Ima Gonner\" or anything else that comes to mind.